Fibaro Flood Sensor

Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. The device can be battery or DC powered (12 or 24v DC). It comes equipped with three gold probes for monitoring and reporting any flood condition. These events can be reported to the Z-Wave network, other devices and additionally to any existing alarm system via a normally closed (NC) contact.
The Flood Sensor also comes with a built in temperature sensor.

The device is designed to be placed on the floor or fitted to a wall with the sensor’s probe extended via a connecting wire. The device has a built in LED and sound alarm. It also comes equipped with a tilt sensor which reports any movement such as the device being moved from its fixed monitoring location.

The Fibaro Flood Sensor is sink-resistant and capable of sending alarm signals while floating on water.

Contact us for a supply & installed quote

• Unique, floating design
• Detects flooding or fire
• Battery or DC powered
• Communicates with a Z-Wave network or a wired alarm system
• Features wireless software update.

Power Supply: 12 – 24v DC

Battery Type: CR123A

Power Consumption: 0.4W

Output terminals maximum current carrying capacity (ALARM NC, TAMP NC): 25mA

Maximum voltage at output terminals: 40V (AC or DC)

Radio protocol: Z-Wave

Radio frequency: 921.42Mhz – AU/NZ

Range: up to 50m outdoors up to 30m inside (depending on building structure)

Operational Temperature: 0°C – 40°C

Measured temperature range: -20°C – 100°C

Temperature measuring accuracy: 0,5°C (within 0°C- 40°C range)

Dimensions (Diameter x Height): 72 mm x 28 mm